Featuring state-of-the-art technology, our Helmet Heating Visor harnesses the power of electricity to provide an instant and consistent heat supply. No more numbing cold or icy wind cutting through your ride. Embrace warmth like never before, feeling as if you're in a cozy haven while conquering the asphalt.
Overview
Essential details:
Type | Flip Up Helmet |
Size | 88mm 98mm, Universal |
||
|
|
Voltage |
12V | ||
Thickness | ≥0.35mm |
Power adapter |
12V on-board / 5V-2A USB power supply |
||
Model Number |
HAl |
Visible light transmittance |
>80% |
||
Current | 1A |
Feature | Anti-fog |
Product Description:
1. Paste the positioning film on the outer side of the helmet visor. Pay attention to the distance between the upper edge of the visor and the electric heating lens (area A) to be greater than 15mm, so as to avoid scraping the waterproof rubber strip on the helmet when the visor is uncovered;
2. Remove the helmet visor and clean the inner side of the visor (face side);
3. Tear off the release paper of 3M adhesive on both sides of the heating lens (do not tear off the release paper completely);
4. After the position of the electric heating lens is finally determined, tear off the release paper of the remaining 3M adhesive strip and press the adhesive strip;
5. Tear off the 3M release paper of the external power box, paste the external power box in a position that does not affect the line of sight, tear off the protective film of the heating lens surface. Tear off the positioning film, and put the visor back into the helmet;
6. Attach the cable holder to the helmet to secure the cable plug;
7. Connect to the on-board power cord or connect to the USB cable.