Crafted with the utmost precision and reliability, the AEROKIT V3 is built to withstand the rigors of intense flights. Its robust construction ensures durability and longevity, while the intuitive interface guarantees a hassle-free setup process.
Specification
| items | Details |
|---|---|
| Material | Metal |
| Type | Disinfection and sterilization |
| Function | Metal |
| Private Mold | NO |
| Capacity | 1 ml |
| Baro | Infineon DPS310 (I2C2) |
| MCU | STM32H743VIT6, 480MHz, 1MB RAM, 2MB Flash |
| OSD | AT7456E (SPI2) |
| ADC AirSpeed voltage divider | 20K:20K |
Features
- STM32H743VIT6, 480 MHz, 2MB Flash
- ICM42688-P (SPI1) & ICM42605 (SP14)
- OSD (SPI2)
- DPS310 (I2C2)
- MicroSD BlackBox (SDI0)
- 7x UARTs, 2x I2C, 1x CAN, 1x SPI3 breakout
- 6x ADC (Vbat, Current, VB2, CU2, RSSI, Airspeed)
- 13x PWM outputs
- Switchable dual camera inputs
- Switchable 5V/9V (12V) outputs
- 8-36V DC IN (3-8S Lipo)
- High-precision current sense (90A continuous, 220A peak)
- BEC 5V 2A cont. 3A peak for FC
- BEC 9V 2A cont. 3A peak 12V option for Camera / VTX
- BEC Vx 8A cont. 10A peak for servos
- Vx = 5V Default, 6V or 7.2V option
- LD0 3.3V 200mA cont.
- Ardupilot MATEKH743
- INAV MATEKH743
* MCU: STM32H743VIT6, 480MHz , 1MB RAM, 2MB Flash
* IMU: MPU6000 (SPI1) & ICM42605 (SPI4)
* Baro: Infineon DPS310 (I2C2)
* OSD: AT7456E (SPI2)
* Blackbox: MicroSD card slot (SDIO)
* 7x Uarts (1,2,3,4,6,7,8) with built-in inversion.
* 13x PWM outputs(including “LED” pad)
* 2x I2C
* 1x CAN
* 6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)
* 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
* 1x SPI3 breakout
* USB/Beep Extender with Type-C(USB2.0)
* Dual Camera Inputs switch
* 5V/9V(12V) for Camera/VTX power switch
* High-precision Current Sense (90A continuous, 220A peak)
* Battery Voltage Sensor: 1K:10K (Scale 1100 in INAV, BATT_VOLT_MULT 11.0 in ArduPilot)
* ADC VB2 voltage divider: 1K:20K
* ADC AirSpeed voltage divider: 20K:20K
* Static power 160mA@5V
FC Firmware
* ArduPilot(ChiBiOS): MATEKH743
* INAV: MATEKH743
PDB
* Input voltage range: 8~36V (3~8S LiPo) w/TVS protection
* 2x ESC power pads
* Current Senor: 220A, 3.3V ADC (Scale 150 in INAV, 66.7 A/V in ArduPilot)
* Sense resistor: 90A continuous, 220A peak.
BEC 5V output
* Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
Output 5.15 +/- 0.1V DC
* Continuous current 2 Amps, 3A Peak
BEC 9V /12V output
* Designed for Video Transmitter, Camera, Gimbal ect.
* Continuous current 2 Amps, 3A Peak
* 12V option with Jumper pad
BEC Vx output
* Designed for Servos
* Voltage adjustable, 5V Default, 6V or 7.2V via jumper
* Continuous current 8 Amps, 10A Peak
BEC 3.3V output
* Linear Regulator
* Continuous current: 200mA
Physical
* Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mm
* Dimensions: 54 x 36 x 13 mm
* Weight: 30g with USB extender
